LENEL LNL-1100 INPUT MODULE

Description

The Lenel® Input Control Module (ICM) provides the access control system with high-speed acknowledgment of critical alarm points in monitored areas. The ICM communicates directly with the Intelligent System Controller (ISC) either by 2-wire or 4-wire RS-485 communication. The ICM has 16 configurable input control points and 2 output control relays. It supports normally open, normally closed, supervised and non-supervised circuits. The input circuits are scanned using an analog-to-digital converter. The digitized input status signal is software-monitored and controlled, so that each input point can be programmed as a supervised or non-supervised alarm point. The output relays can also be configured for fail-safe or fail-secure operation. Each relay supports the “On,” “Off,” and “Pulse” Lenel OnGuard® software commands.
FEATURES & FUNCTIONALITY • Grade B, A, and AA line supervision • 12 or 24 VDC input power • 16 programmable supervised or non-supervised contacts • 2 Form-C 5 A, 28 VDC contacts for load switching • 2 dedicated inputs for tamper and power failure status • On-board termination jumpers • DIP switch-selectable addressing • Elevator control, support for 128 floors • Status LED for host communication and heartbeat • Variable resistor values for line supervision • Downloadable firmware